WF270 Generic Whirlpool Filter 10JG5M
l Suitable for:External
inline refrigerator water filter is a replacement cartridge for side-by-side
refrigerators that have externally fitted cartridges
l Suitable for:
l Compatible External
In-Line Fridge Water Filter DA2010CB, Premium Water Filter for WHIRLPOOL is a
suitable replacement for 4378411 and refrigerators that have a filter outside
at the back of the fridge or in a nearby cabinet.
l Replaces the following
l Whirlpool 4378411,
Whirlpool WF270, WF/12 WF270, WF001, WF020, WF12, WF270,4378411, WF270, BFFR,
BFFRF0.25, BFFRMAX, BFFRS, TRU501, BFFR, BFFRF0.25, BFFRLG, BFFRMAX, BFFRS,
BFFRSED, GILF1025, GT1-73, GT6-1 Fridge Filter, GILF1025, GT6-12, RFWH050,
2890JC2990A, 6-CCB-210G, Aquaflow,IN-10, K2333,
Fridge Water Filter
Installation and replacement procedure
for the Compatible External fridge water filter :
l 1. Find isolation
valve which will be located somewhere on the water supply line to the fridge.
Turn it off and to depressurise the system draw a large glass of water from the
water outlet at the fridge.
l 2. . Have a bucket and
towel ready as there will be a small spillage of water during this process.
Remove the old filter by depressing the locking collar at each end of the
filter with your thumb nail (or similar) and at the same time pull out the
water supply line. Discard the old filter.
l 3. Take the new
filter, making sure the flow direction is correct and insert the inlet side
only, the line will go in approx 5 10mm and you will feel it hit home.
l 4. Placing the filter
in the bucket, turn on the water supply and allow about 5 litres of water to
flow through the filter and into the bucket. This will remove any loose carbon
fines. Turn off the water supply and connect the line that feeds into the
fridge. Turn on the water supply and run approx 2 litres through the system.
l 5. Complete the
Replacement Due sticker and place in a visible area inside the fridge door.