2 X EXTERNAL FRIDGE WATER FILTER - WESTINGHOUSE & ELECTROLUX

This Aqua-Plus fit WESTINGHOUSE, FRIGIDAIRE, ELECTROLUX 1450970 REPLACEMENT FILTER 240396407, 1438545,1458682

External inline refrigerator water filter is a replacement cartridge for side-by-side refrigerators that have externally fitted cartridges replaces: WFCB, WF2CB External in-line Fridge Filter, 1450970 & many other filter part numbers, will fit all brands of fridges that use an external in-line fridge filter.

Most fridges with internal filters can be converted over to use these filters.

Features:

• This Fridge Filter Suits Any External Fridge Filter With 1/4" Plastic Tubing

• Reduction filter works by chemical and mechanical means

• Delivers clean, clear water for great tasting up to 97%

• Effectively reduce cysts, chlorine taste and bad odour(99% of lead, 99% of Mercury, over 99% cysts, over 99% asbestos, 93%ofToxaphene, 77% Altrazine, 99% Lindane, 97% Chlorine and 99%, rust, sand, dirtand sediment.)

• Tested and used material according NSF International against NSF/ANSI Standards 42 for the reduction of chlorine taste and odour.

• ​In order to keep your filter working at its optimum, fridge manufacturers generally recommend replacement of fridge water filters every 6 months, or when the "change filter" light comes on or notice a decrease in flow of water..

Suitable for:
External inline refrigerator water filter is a replacement cartridge for side-by-side refrigerators that have externally fitted cartridges




Suits the Following Fridge Models

Electrolux model: ESE607WA*05, ESE607WA*06, ESE6977SC, ESE6077SC, ESE6977S, CESE6977SE, ESE6077SC, ESE6077SE, ESE6077SF, ESE6977SF, ESE6077SG, ESE6977SG, ESE6078WA, EHE5167SB

THIS FILTER ALSO SUIT FOR PART NUMBER 1456145K OR 00740560,1458682

Westinghouse: WSE6070SA, WSE6070PB*06, WSE6070SB*06, WSE607WB*06, WSE6970PA, WSE6970SA, WSE6970WA,WSE6970WF ,WSE6970SF,WSE6970SE, WBE5160SCRH, WBE5160S, WBE5160,WHE5160SA,WSE6070SA,WSE6870SA

Fridge Water Filter Spec:

Installation and replacement procedure for the externalfridge water filter:

1. Find isolation valve which will be located somewhere on the water supply line to the fridge. Turn it off and to depressurise the system draw a large glass of water from the water outlet at the fridge.

2. . Have a bucket and towel ready as there will be a small spillage of water during this process. Remove the old filter by depressing the locking collar at each end of the filter with your thumb nail (or similar) and at the same time pull out the water supply line. Discard the old filter.

3.Take the new filter and take off the wrapping.Take off the blue clip and press the Collet. Remove the rubber cap. Then you can connect the tube into the Collet of the filter. Please making sure the flow direction is correct and insert the inlet side only, the line will go in approx 5 10mm and you will feel it hit home.

4. Placing the filter in the bucket, turn on the water supply and allow about 5 litres of water to flow through the filter and into the bucket. This will remove any loose carbon fines. Turn off the water supply and connect the line that feeds into the fridge. Turn on the water supply and run approx 2 litres through the system.

5. Complete the Replacement Due sticker and place in a visible area inside the fridge door.