(02) 96832253
ClicktoBuy.com.au is Australia Base Water Pumps Online Store. $5 Australia Wide delivery
your cart 0 items
1 x SAMSUNG FRIDGE FILTER CARTRIDGE DA29-10105J
Product Availibility : In Stock
$17.50
     - OR -




PREMIUM WATER FILTER CARTRIDGE FOR SAMSUNG FRIDGES:
Replacement for: DA29-10105H, WSF-100 andEF9603



The Samsung Aqua-Pure Da29-10105J Fridge Filter for SAMSUNG Fridges Replace Or compatible with the following Filter Part Numbers
- 3010541600, 3019974100, 3650JD8050A, 3890JC2990A, 497818, 5231JA2010B, 5231JA2012A, BL-9808,C00114417, DA29-10105J, DD-7098, EF-9603, GXRTDR, GXRTQ, GXRTQR, HAFEX-EXP, Magic WaterFilter, WSF-100, 5231JA2010A

-External inline refrigerator water filter is a replacement cartridge for side-by-side refrigerators that
have externally fitted cartridges replaces : amsung (WSF-100, EF-9603, DA29-10105J), LG (BL-9808,BL-9303, 3650JD8050A), Siemens, Neff, Bosch, Daewoo (DD-7098) etc.

Features:

  • Reduction filter works by chemical and mechanical means

  • ​DA29-10105Jfridge water filter isdesigned to fit into SAMSUNG side by side fridges that have externally fitted cartridges

  • Delivers clean, clear water for great tasting

  • Effectively reduce cysts, chlorine taste and bad odour

  • Tested and used material according NSF International against NSF/ANSI Standards 42 for the reduction of chlorine taste and odour.

    In order to keep your filter working at its optimum, fridge manufacturers generally recommend replacement of fridge water filters every 6 months, or when the "change filter" light comes on or notice a decrease in flow of water..

Fridge Water Filter Spec:

Installation and replacement procedure for the DA29-10105Jfridge water filter:

1. Find isolation valve which will be located somewhere on the water supply line to the fridge. Turn it off and to depressurise the system draw a large glass of water from the water outlet at the fridge.

2. . Have a bucket and towel ready as there will be a small spillage of water during this process. Remove the old filter by depressing the locking collar at each end of the filter with your thumb nail (or similar) and at the same time pull out the water supply line. Discard the old filter.

3.
Take the new filter and take off the wrapping.Take off the blue clip and press the Collet. Remove the rubber cap. Then you can connect the tube into the Collet of the filter. Please making sure the flow direction is correct and insert the inlet side only, the line will go in approx 5 10mm and you will feel it hit home.
4. Placing the filter in the bucket, turn on the water supply and allow about 5 litres of water to flow through the filter and into the bucket. This will remove any loose carbon fines. Turn off the water supply and connect the line that feeds into the fridge. Turn on the water supply and run approx 2 litres through the system.

5. Complete the Replacement Due sticker and place in a visible area inside the fridge door.

 


9/16 Loyalty Rd, North Rocks NSW 2151
Call Now
(02) 96832253
c