Construction Site Dewatering (e.g. property owners for clearing water from trenches or for maintenance purpose);
Cellar or basement drainage on buildings;
Transfer and drainage of stormwater;
Circulation in decorative waterfalls and fountains;
Drainage of treated water in water treatment plants
Suitable use in water, rain water, ground water, sand carring water, mud carring water;
is provided on the end of the pump shaft. The agitator helps prevent
air buildup inside the casing and also reduces clogging when solid
objects enter the pump.
Vortex Impeller: It creates a whirlpool pump action. This allows soft solids, stringy material, grey water and light sewage to be pumped.
CWL (Continuous Water Level) 90mm.
Only 90mm of water is required for the pump to run, reducing the chance
of failure at low levels. This also allows the pump to drain to much
lower levels than allowed by most pumps.
Double mechanical seals -protects against water leakage which shorts out motor.
High grade bearings for high temperature operation are used. As the bearings are deep grooved and doubled shielded and covered permanently in grease, lubricating oil is not required. That is why Tsurumi's Pump life is lot more life span than other brands
The pump can run non stop 24/7 without overheating or cutting out.
Molded "cable boot" extends the bending radius of the power cable preventing kinking and increasing cable life.
Safety and reliability (Continues rated)
Insulation class: E
Miniature thermal protectors (MTPs) are built into its motor and integrated in motor windings. The MTP will cut the motor circuit in the event of excessive heat.