Product Description

Product Description

This pressure pump controller is for starting single phase pumps, when taps are either opened or closed. It adjusts the flow rate and pressure, keeping these constant. Come with two set of cables in order for you connect to the pump and to power supply. It also provides for loss of prime or run dry protection. This means that the pump will stop operate when you run out of tank water.

Technical Specifications:

• Max current : 10A
• Voltage: 240V
• Suits many pumps and other brands of single phase pumps up to 1.5hp
• Fully automatic control of the pump.
  
• Run dry Protection
  
• Inlet/outlet 25mm BSP male (standard 1")
• Electrical protection rating IP55
• In-built check valve in the bottom of the controller
• Re-set button with power, on and failure indicator lights
• Externally adjustable via slotted screw in top for cut-in from1.1-3.5 bar
  
• Max temperature: 60C

Comes with 12 Months Warranty.